Water Heater for the pool

On a hot summer day the water in a small country pool is heated obviously. When the weather is overcast heating time is prolonged or, in general, the temperature doesn’t achieve a comfortable temperature of +22oC. In massive pools organic heating takes even longer. To solve this problem, made a heater to the pool, working from different energy resources.

The simplest water heater for your swimming pool is a heat exchanger. The foundation of the design is a tank, by the liquid flows. It’s connected to the heating system or some other heating water heater. In the tank is an integrated coil. This component is that the heat exchanger. Pool water slides through the coil, heating against the liquid within the tank.

Why do you want such a complicated pool heater if you can just run on the water right throughout the heater? You can use this type of strategy, however there are two problems:

After warmed, they settle on the walls of the heat exchanger because of good sludge, clogging it.

  • Pool water is filled in oxygen, which divides the metal walls of the heat exchanger.
  • To costly boiler or flow heater doesn’t fail, the heating system has another loop. The heat exchanger is simpler and cheaper to change whether it gets clogged or leaks from oxidation of their walls.

    In a little children’s pool piping has been put to the principle of this machine”underfloor heating”. A little bit of water the coil will heat quickly, and using a massive volume won’t cope. Electric versions

    The second most popular is an electrical heater for the pool, consisting of a machine, heating elements along with a thermostat. Devices come in two types:

    The system is made up of massive tank, in which the water is heated from the heating elements, and from there it is fed to the pool.

  • Flow-through. The gadget is connected to the water treatment system of their pool. There’s a filter in front of the water heater, which extends purified water, which gets rid of the formation of solid deposits.
  • Based on the capability, the apparatus are connected to single-phase and three-phase networks. After calculating, these parameters have been taken into account:
  • per 1 m3 of water at an open swimming pool – 1 kW of heating element power;
  • 1 m3 of water via an indoor swimming pool – 0.5 kW of heating components electricity.
  • The requirement to heat a massive quantity of water requires the use of strong devices. Electricity prices are enormous, and you want to put another field of pipes. Heating pump

    Rather complicated in the device of the heater for the pool heat pump refers to innovative technology. The gadget is effective and cost-effective, however it’s rarely used remonttool.ru because of its high cost.

    Important: The heat pump operates on the principle of their fridge, only here the circuit that releases heat, not cold, is in demand.

    The machine is made up of two circuits, in which the fluid circulates. The outer pipe is put underground, at the bottom of the window or alternative place where you can extract the heat. The interior circuit is put within the pool. It offers the water that the heat extracted by the outer pipe.