What type of flat is thought to be a corner flat?

A corner apartment is located in the end of the building: this is, part of its walls aren’t adjacent to the interiors, however would be the outer walls of the home.

There may be one apartment in a corner flat – it occupies the entire end of the house, it’s likewise referred to as a corner flat. Or 2 – the windows of a single forget the road, the next – the lawn. Is based on the building program, the layout of the assumptions.

There’s also a”different caste” – housing with walls from the expansion joints. These”gaps” between entrances are usually made in multi-story buildings, the most important task of the created unit – to split the deformation forces during the shrinkage of the construction, in case of crises. Pros and cons of corner apartments in the joint are somewhat different from the typical ones with access to this street – we will pay special attention to this subject in the last section.


Considering that the 2-3 sides of this space is outdoors, in winter it’s 3-5C colder, and in summer on the contrary – hotter domikday.ru. Especially if the conclusion of the home is heated by sunlight. In some cases, the gap reaches 10C – however such a difference is unacceptable, suggests a problem with the outside of the home – most likely have to get hold of the management firm, asking (or forcing) to meet their direct duties, to spot the cracks formed.

Corner apartment in a brick house with thick walls is much more comfy. Such risks are not subjected – the thickness of the wall acts as a buffer, so not allowing overheating, overcooling.


When an area has just one wall united with the road, it generally has enough space heat to avoid freezing and condensation. But when there are two outside partitions, and they are adjacent – there’s a higher probability of freezing in the corner, the formation of condensation in it, and thus – mold, fungus. Their spores not only spoil the appearance of the room, but also lead to the appearance, complication of several serious ailments.

Important! The problems of corner location are justified when the factors are related – too low temperatures from heating batteries together with dampness is certain to cause moldy walls.